Tag: icm

Gevo, Musket Corporation ink Isobutanol deal for Gasoline Blending, for Marine and Off-Road Markets in Western US

Gevo, Musket Corporation ink Isobutanol deal for Gasoline Blending, for Marine and Off-Road Markets in Western US

June 18, 2016 |

In Colorado, Gevo and Musket Corporation signed an agreement to  supply isobutanol for blending with gasoline.Gasoline demand for the marine market in the U.S. is estimated to be approximately 1.7 billion gallons per year1. The National Marine Manufacturers Association has endorsed the use of Gevo’s isobutanol in the marine fuel market because of the superior […]

Read More

ICM reports major efficiencies achieved with use of its patented Selective Milling Technology

ICM reports major efficiencies achieved with use of its patented Selective Milling Technology

June 1, 2016 |

In Kansas, ICM’s patented Selective Milling Technology™ (SMT™) has shifted from a new technology to a proven process at approximately 15% of the ethanol plants in the U.S. and has allowed them to produce more than 300 million gallons of ethanol since the original installations.  From the earliest adopters to current customers, the SMT™ process […]

Read More

ICM’s Fiber Separation Technology expands to four commercial plants in North America

ICM’s Fiber Separation Technology expands to four commercial plants in North America

May 22, 2016 |

In Kansas, ICM said that its Fiber Separation Technology is now being operated at four major commercial plants in North America.  FST is part of  ICM’s EPA-approved pathway to cellulosic ethanol and is a value-added platform technology that removes fiber from the Generation 1.0 ethanol process.  FST increases ethanol and corn oil throughput and creates […]

Read More

ICM to design 50 million gallon dry-mill corn ethanol plant in Brazil

ICM to design 50 million gallon dry-mill corn ethanol plant in Brazil

March 22, 2016 |

In Brazil, ICM Inc. announced it has signed a contract with FS AgriSolution Industria de Biocombustiveis Ltda. (FS), and Summit Brazil Renewables I LLC, (Summit) an affiliate of Summit Agricultural Group, to design a dry-mill corn ethanol plant with a 50 MMgy (189,250 cubic meters per year) nameplate production capacity, located near the city of […]

Read More

ICM, The Andersons to expand Albion Ethanol plant in Michigan to 136 million gallon capacity

ICM, The Andersons to expand Albion Ethanol plant in Michigan to 136 million gallon capacity

March 13, 2016 |

In Kansas, ICM will design and build the expansion of The Anderson’s Albion, Michigan location, doubling the facility’s capacity. The project, originally announced in December 2015, will enable the facility to double the capacity of The Andersons Albion Ethanol plant from its current average rate, as well as add a combined heat and power system […]

Read More

ICM competes two 1,000 hour performance runs of cellulosic ethanol process

ICM competes two 1,000 hour performance runs of cellulosic ethanol process

August 19, 2015 |

In Missouri, ICM Inc. announced the successful completions of its first and second 1,000-hour performance runs (1,100 continuous hours each run) of its patent-pending Generation 2.0 Co-Located Cellulose Ethanol process.  The runs, performed at ICM’s pilot plant in St. Joseph, Missouri, prove out the colocated technology design for the conversion of cellulosic biomass feedstocks, including energy […]

Read More

Kansas House bill would add 4.5 cent tax to every gallon of ethanol produced

Kansas House bill would add 4.5 cent tax to every gallon of ethanol produced

April 2, 2015 |

In Kansas, a bill in the state House of Representatives proposes adding a 4.5 cents per gallon tax on all ethanol produced in the state, a move that ICM says will make the fuel uncompetitive relative to ethanol produced in neighboring states. ICM’s CEO told the House committee on taxation at a hearing recently that […]

Read More

ICM signs contract for California gasification demo project

ICM signs contract for California gasification demo project

March 12, 2015 |

In Kansas, ICM announced a signed contract with JUM Global, LLC, a global waste solution developer contracted with the City of San Jose, CA., for a gasification demonstration unit using ICM’s proprietary technology. This gasification demonstration unit will be operated at the San José-Santa Clara Regional Wastewater Facility, which will process up to 10 short […]

Read More

E Energy Adams latest to add ICM’s SMT and FST technologies

E Energy Adams latest to add ICM’s SMT and FST technologies

February 16, 2015 |

In Kansas, ICM announced that E Energy Adams LLC has selected ICM as its partner for a multifaceted technology and capacity upgrade at its Adams, NE plant. ICM’s patent-pending Selective Milling Technology™ and patent-pending Fiber Separation Technology™ will drive the project, allowing E Energy Adams to increase throughput, decrease cost per gallon, and create the […]

Read More

Kansas Ethanol to install ICM’s patent-pending Fiber Separation Technology

Kansas Ethanol to install ICM’s patent-pending Fiber Separation Technology

February 10, 2015 |

In Kansas, ICM announced that Kansas Ethanol LLC, of Lyons, Kansas, has signed an agreement for purchase, license to operate, and full-scale installation of ICM’s patent-pending Fiber Separation Technology™. Kansas Ethanol is one of the 19 ethanol plants in North America either running or under contract to run ICM’s Selective Milling Technology™. Combined, these plants […]

Read More